Can You Use Ddr3 In Ddr4 Slot

• Can I Use Ddr3 In Ddr4 Slot
• Can You Use Ddr3 In A Ddr4 Slot
• Can I Use Ddr3 Memory In A Ddr4 Slot
• Will Ddr3 Work On Ddr4
• Ddr4 2133 Laptop Memory

DDR3 vs DDR4

This article presents you a comparison between DDR3 and DDR4, highlighting the important differences between both RAMs. However, before delving into the difference between DDR3 and DDR4, let us see the specifications of both RAMS. As a matter of fact, DDR, which stands for Double Data Rate, is a specification used for RAM. DDR4 is the successor of DDR3 and hence consists of improvements in factors such as power consumption, size, speed and efficiency. DDR4, which was released this year, is still not much famous in the market but, in the next year, it will soon outstand DDR3. DDR4 RAMs consume less power than DDR3, but their speed is much higher. Also, the memory density allowed is higher in DDR4. The physical length of DDR3 and DDR4 are the same, but they are not backward compatible as the standard is different. Therefore, the notch in DDR3 and DDR4 are at different places and a DDR4 module will not fit into a DDR3 socket and vice versa.

What is DDR3?

DDR3, which stands for Double Data Rate Type 3, is a type of Dynamic Random Access Memory (DRAM) that came as the successor of DDR and DDR2. It was released to the market in 2007 and today almost all computers and laptops in the market uses DDR3 as the RAM. The voltage specification for DDR is 1.5 V and, therefore, it consumes very less power when compared to its predecessors. DDR3 standard allows chips up to capacity 8 GB. DDR3 RAM are available for different frequencies such as 800, 1066, 1333, 1600, 1866, 2133 MHz. A DDR3 RAM module used for personal computers has 240 pins and the length is 133.35 mm. The DDR3 modules used on laptops are called SO-DIMM and its length is much smaller with a length of 67.6 mm and less number of pins that is 204 pins. There is a special version of DDR3 RAMs called DDR3 low voltage standard, which uses just 1.35 V instead of 1.5 V and is used in some mobile devices to achieve better battery life.

What is DDR4?

There's a drastic difference between normal, system RAM and graphics card RAM. As long as that DDR4 Motherboard has a PCIe x16 Slot present on the motherboard, you can install a DDR5 Graphics Card, or any other Graphics Card for that matter. DDR4 memory modules are not compatible with DDR3 slots and vice versa hence the slot on the motherboard determines which type of RAM must be fixed. Currently, the board manufacturers use DDR3 slots but, in the next years, it will transform to DDR4. The processor you have can, you on the other hand cannot. Manufacturers have to choose among the possible RAM types a processor support, for your machine they chose DDR3 and that's the only thing you can put. If you bought DDR4 it wouldn't fit, it's different. I am curious however, because they wrote DDR3L in there, and DDR3L is different from.

4 x 240-pin DDR3 DIMM slots Supports Dual Channel DDR3 1333/ 1066MHz non-ECC, un-buffered memory (Max 8GB on 64-bit Operating Systems) keep an eye on what you are buying and you should be. The short answer is that yes, there are plenty of differences, but most of the time your motherboard will make the decision for you. A motherboard with DDR4 slots cannot use DDR3, and you can't put.

DDR4 was introduced this year (2014) as the successor to DDR3. Still DDR4 is not much famous in the market because it was just released a few month ago and hence the motherboards in the market still supports only DDR3. However, after a few months , DDR4 will surely take over DDR3. DDR4 stands for Double Data Rate Type 4 and it has several advancements and improvements over DDR3. DDR4 supports higher memory densities up to 16 GB. The frequency in which DDR4 modules are available is higher than what DDR3 supports and the values available are 1600, 1866, 2133, 2400, 2667, 3200 MHz. The power consumption is further reduced as the voltage specification is 1.2 V. The lengths of DDR4 modules are same as the respective lengths of DDR3 module, but the number of pins is increased. The version used for PCs have 288 pins while the SO-DIMM modules used for laptops have 260 pins. A Low voltage standard DDR4 RAM, which would use about 1.05 V, will be available targeting for mobile devices that needs better power efficiency.

What is the difference between DDR3 and DDR4?

• DDR4 is the successor of DDR3.

• DDR3 was introduced back in 2007 while DDR4 was introduced in 2014.

• DDR3 supports memory densities only up to 8 GB, but DDR4 supports memory densities up to 16 GB.

• The speeds or the frequency of DDR4 RAMs are much higher than the frequency of DDR3 modules. This makes DDR4 much faster by providing better transfer rate.

• DDR3 works at a voltage of 1.5V while DDR4 works at a lesser voltage, which is 1.2V making it more power efficient.

• There is a special version of both DDR3 and DDR4 called low voltage standard, which uses lesser voltage hence lesser power. The low voltage standard of DDR3 uses 1.35V while it is 1.05V for DDR4.

• DDR3 modules have only 240 pins, but DDR4 modules have 288 pins.

• Both DDR3 and DDR4 have a smaller sized module known as SO-DIMM used for mobile devices such as laptops. SO-DIMM DDR3 has 204 pins while SO-DIMM DDR4 has 260 pins.

• DDR3 memory modules are not compatible with DDR4 slots and DDR4 modules are not compatible with DDR3 slots.

• The notch in the DDR3 and DDR4 is placed at different places so that they will not be mistakenly fixed to wrongs slots.

• DDR3 supports only 8 internal memory banks, but DDR4 supports 16 memory banks.

Summary:

DDR4 vs DDR3

DDR4 being the successor of DDR3 has various improvements. The speed or the frequency of the RAM modules have been much increased in DDR4 giving better transfer rate. A DDR4 module can have a size of 16 GB while this limited to 8 GB for DDR3. However, the power consumption of DDR4 is much less with a 1.2 V voltage used instead of 1.5 V. Therefore, it would be much power efficient providing better battery life for mobile devices. DDR4 memory modules are not compatible with DDR3 slots and vice versa hence the slot on the motherboard determines which type of RAM must be fixed. Currently, the board manufacturers use DDR3 slots but , in the next years, it will transform to DDR4.

Images Courtesy:

1. DDR3 via Pixabay

Can I Use Ddr3 In Ddr4 Slot

2. Transcend_DDR400_TS64MLD64V4J By Solomon203 (Own work) [CC BY-SA 3.0 or GFDL], via Wikimedia Commons

How to identify computer ram ddr1 ddr2 ddr3, DDR4 Identifying the Computer RAM (Random Access Memory) like DDR1, DDR2, DDR3, and DDR4 physically is not so hard if you follow the steps.

1. Distance of Notch
2. Integrated Chip (IC) type

DDR1, DDR2, DDR3, DDR4 is the most using RAM currently in the market.

First of all confirm is it DDR1, DDR2, DDR3, or Different DDR's SDRAM. keep your DDR chip front-facing as given bellow. here look to the notch each DDR notch distance is different from others DDR. It's mentioned in the picture.

Also Read :

Distance of Notch

• • Notch Means above cuts Mark on RAM
    • DDR1, DDR2, DDR3 having Single Cut mark on the base of the RAM
  • But you can see the Cut mark (Notch) distance (see below photo)
    • Notch of DDR1 and DDR2 are similar but if you see closely,
      • You can find DDR1 Notch is just above the IC and DDR
      • DDR2 Notch is just far to the IC
    • Notch of DDR3 is different from the other two.

• Integrated Chip (IC)

  • See the Above Photo
    • DDR3 having small and square type IC.
    • DDR2 is just bigger then DDR3 and smaller the DDR1,
    • In this case, too, DDR1 and DDR2 are just a small difference
      • IC in DDR1 are touched both top and bottom of RAM
      • and IC in DDR2 is just center of the RAM

• Number of Pins in DDR1, DDR2, DDR3, DDR4

  • DDR1 – 184 Pins
    • DDR2 – 240 Pins
      • DDR3 – 240 Pins
        • DDR4 – 288 Pins

• Voltage of RAM

  • The voltage of RAM cannot be used for the Physical finding of RAM, but it can be used to place the RAM in the Motherboard Slot. (voltage are written in the RAM Slot of Motherboard)
    • DDR1 Volts – 2.5 v
      • DDR 2 Volts – 1.8 v
        • DDR3 Volts – 1.5 v
          • DDR4 Volts – 1.2v

• Click to Buy Best DDR RAMs for Desktops

Can You Use Ddr3 In A Ddr4 Slot

• Click to Buy Best DDR RAMs for Desktops

Can I Use Ddr3 Memory In A Ddr4 Slot

• DDR4 is the successor of DDR3.

• DDR3 was introduced back in 2007 while DDR4 was introduced in 2014.

• DDR3 supports memory densities only up to 8 GB, but DDR4 supports memory densities up to 16 GB.

• The speeds or the frequency of DDR4 RAMs are much higher than the frequency of DDR3 modules. This makes DDR4 much faster by providing better transfer rate.

• DDR3 works at a voltage of 1.5V while DDR4 works at a lesser voltage, which is 1.2V making it more power efficient.

• There is a special version of both DDR3 and DDR4 called low voltage standard, which uses lesser voltage hence lesser power. The low voltage standard of DDR3 uses 1.35V while it is 1.05V for DDR4.

• DDR3 modules have only 240 pins, but DDR4 modules have 288 pins.

• Both DDR3 and DDR4 have a smaller sized module known as SO-DIMM used for mobile devices such as laptops. SO-DIMM DDR3 has 204 pins while SO-DIMM DDR4 has 260 pins.

• DDR3 memory modules are not compatible with DDR4 slots and DDR4 modules are not compatible with DDR3 slots.

• The notch in the DDR3 and DDR4 is placed at different places so that they will not be mistakenly fixed to wrongs slots.

• DDR3 supports only 8 internal memory banks, but DDR4 supports 16 memory banks.

Summary:

DDR4 vs DDR3

DDR4 being the successor of DDR3 has various improvements. The speed or the frequency of the RAM modules have been much increased in DDR4 giving better transfer rate. A DDR4 module can have a size of 16 GB while this limited to 8 GB for DDR3. However, the power consumption of DDR4 is much less with a 1.2 V voltage used instead of 1.5 V. Therefore, it would be much power efficient providing better battery life for mobile devices. DDR4 memory modules are not compatible with DDR3 slots and vice versa hence the slot on the motherboard determines which type of RAM must be fixed. Currently, the board manufacturers use DDR3 slots but , in the next years, it will transform to DDR4.

Images Courtesy:

1. DDR3 via Pixabay

Can I Use Ddr3 In Ddr4 Slot

2. Transcend_DDR400_TS64MLD64V4J By Solomon203 (Own work) [CC BY-SA 3.0 or GFDL], via Wikimedia Commons

How to identify computer ram ddr1 ddr2 ddr3, DDR4 Identifying the Computer RAM (Random Access Memory) like DDR1, DDR2, DDR3, and DDR4 physically is not so hard if you follow the steps.

1. Distance of Notch
2. Integrated Chip (IC) type

DDR1, DDR2, DDR3, DDR4 is the most using RAM currently in the market.

First of all confirm is it DDR1, DDR2, DDR3, or Different DDR's SDRAM. keep your DDR chip front-facing as given bellow. here look to the notch each DDR notch distance is different from others DDR. It's mentioned in the picture.

Also Read :

Distance of Notch

• • Notch Means above cuts Mark on RAM
    • DDR1, DDR2, DDR3 having Single Cut mark on the base of the RAM
  • But you can see the Cut mark (Notch) distance (see below photo)
    • Notch of DDR1 and DDR2 are similar but if you see closely,
      • You can find DDR1 Notch is just above the IC and DDR
      • DDR2 Notch is just far to the IC
    • Notch of DDR3 is different from the other two.

• Integrated Chip (IC)

  • See the Above Photo
    • DDR3 having small and square type IC.
    • DDR2 is just bigger then DDR3 and smaller the DDR1,
    • In this case, too, DDR1 and DDR2 are just a small difference
      • IC in DDR1 are touched both top and bottom of RAM
      • and IC in DDR2 is just center of the RAM

• Number of Pins in DDR1, DDR2, DDR3, DDR4

  • DDR1 – 184 Pins
    • DDR2 – 240 Pins
      • DDR3 – 240 Pins
        • DDR4 – 288 Pins

• Voltage of RAM

  • The voltage of RAM cannot be used for the Physical finding of RAM, but it can be used to place the RAM in the Motherboard Slot. (voltage are written in the RAM Slot of Motherboard)
    • DDR1 Volts – 2.5 v
      • DDR 2 Volts – 1.8 v
        • DDR3 Volts – 1.5 v
          • DDR4 Volts – 1.2v

• Click to Buy Best DDR RAMs for Desktops

Can You Use Ddr3 In A Ddr4 Slot

• Click to Buy Best DDR RAMs for Desktops

Can I Use Ddr3 Memory In A Ddr4 Slot

Will Ddr3 Work On Ddr4

Ddr4 2133 Laptop Memory